Fronius IG Wireless Personal Display

Fronius IG Displays and Accessories

The Fronius IG Personal Display is easy to install and easy to use. The readout and interface are based on the same display that comes standard on all Fronius IG Series inverters. Although tested to 150 feet indoors and 500 feet outdoors, there are many reports from the field of the units transmitting from much farther distances.

The Personal Display can aggregate data for up to 15 Fronius IG inverters or show data for each individual inverter in a system - i.e., data from a system that is over 75 kW AC can be viewed together or as sub-systems. It shows instantaneous data such as power, voltage and current, and it will store the daily and cumulative data. The display offers two levels of access: easy and pro. In the easy level, homeowners can view system basics like power, energy output, CO2 offset, and the number of dollars saved. The pro level offers more advanced information like voltage, current and grid frequency. The unit was designed with a backlit display and a stylish silver case to attract the attention of solar enthusiasts and their visitors alike. The display can mount on a wall near a thermostat or clock, or be placed on a coffee table or night stand. A wireless card is required for each inverter to be monitored.

IG Public Display

The Fronius Public Display is constructed on the plug-and-play principle. Just insert the plug-in card or box and any cables supplied, select the display values and away you go. Alphanumeric large-format display. The data from up to 100 inverters can be selected for the rotating display. One value in the group is picked as the favorite and is then displayed every second time the value changes. The following values can be displayed: AC power - total energy; energy/day - energy/year - CO2 total - CO2/year - CO2/ day - total earning; earnings/day - earnings/year - date & time. A COM Card (030-03425 below) must be installed in each inverter to be monitored.

IG DatCom Accessories

Remote data communications and data logging features can easily be added to transform the inverter into a sophisticated data acquisition system and weather monitoring sta- tion. DatCom components and accessories connect to the inverter and each other with standard Cat 5 network cables and RS-232 cables.

Datalogger Boxes and Cards

Datalogging requires a COM card to be installed in each inverter in the system and a Datalogger Box. The Datalogger Box stores the data collected from the inverters and any of the optional weather sensors, and connects to a PC or an external modem to allow you to monitor your PV system from anywhere in the world. Two versions of the Datalogger Box are available. The Datalogger Easy monitors one IG inverter. The Datalogger Pro can monitor up to 100 Fronius IG inverters. Datalogger cards perform the same function as the Boxes. The Easy card works
for one inverter; the Pro card works for up to 100 inverters. Both cards work with a COM card and DatCom systems.

Sensor Box, Sensor Card and Sensors

A Sensor Box or Sensor Card is required to add weather sensors to your data acquisition system. The Sensor Box and Card each have 6 inputs - two for measuring temperature, one for measuring irradiance, two digital inputs for a wind speed sensor and/or kilowatt hour meter and one 20 mA current interface for a humidity sensor.